Outdoor Joinery Specalists & Fencing Supplies
"Traditional Standards With Modern Techniques"
All our products can be made to measure visit our how to page for more information.
This heavy duty classic closeboard panel is constructed from pressure treated redwood timbers. Made to order by hand in our workshop using 75x32 rails and 5" 125mm feather edge board finished off with a two way weathered capping.
These panels are strong, durable and are built to withstand the winds and weather the UK has to throw at them.
This heavy duty Curved Closeboard panel is available in either convex or concave designs (convex shown in image) and is constructed from pressure treated redwood timbers.
Made to order by hand in our workshop using 75x32 rails and 5" 125mm feather edge board finished off with a two way weathered capping. These panels are strong, durable and are built to withstand the winds and weather the UK has to throw at them.
The UNIQUE lap panel is a very strong and sturdy well built example of the most recognisable of all fence panels found in the UK. It has a full frame to both sides with five vertical supports to one side and on the reverse side three vertical supports.
Finished off with a two way weathered capping on top it is made from pressure treated timber to ensure it is very durable and long lasting.
The Downham Classic Trellis is made by hand to order from 19x38 pressure treated batten and it has approximately 150mm space between battens.
This is great for topping fences to allow for a little more height and privacy. It is equally as good installed near flower beds and pots to trail your favourite plants through and up.
The Privacy Trellis is made by hand to order from 19x38 pressure treated batten and it has approximately 75mm space between the battens.
This is great for topping fences, offers amazing privacy and adds extra height where needed.
The Sweeping Trellis is made by hand to order from 19x38 pressure treated batten it has approximately 150mm space or can be made with a privacy space of approx 75mm all finished off on top with a 7X38mm flat cap.
This is great for topping fences to allow for a little more height and privacy, and is also very popular for screening oil tanks and alike.
The Curved Top Trellis is made by hand to order from a 19x38 pressure treated batten, it has an approx 150mm space between the battens or can be made with a privacy space of approximately 75mm between battens.
This is great for topping fences to allow for a little more height and privacy, and is also very popular for screening oil tanks and alike. It can be made with either a concave or convex curve and is capped and finished with a 7x38mm Flat Cap.
This simple to erect very popular product is a firm favourite for helping to cover walls and aid in the training of plants up fences and other vertical surfaces.
Constructed from 19x38 pressure treated batten, it is both very durable and heavy duty.